The “Filter Filler” push valve
Filter Filler tube included in Manual package.
Safety cap removed and “Filler” hose connected.
Insert “Filler” tube into filter, turn on pump and push in valve to fill filter.
Topping off the filter after a element change is easy with the “Filter Filler”!
When finished, turn off the fuel pump, and with the bleed port open, depress the push valve. This will allow any fuel in the filler tube to drain back into the system. Always finish by removing the “Filler” hose and replacing the safety cap onto the push valve.
This same push valve will give you access to fuel if needed for other filter changes as well.