Fuel Polishing Modules

The FilterBOSS Fuel Polishing Modules (FPM) are designed to fit into tight engine compartments and other small onboard spaces. These new models have such a small footprint that many boat owners will now be able to install a filtration system into spaces where traditional units would have never fit before. This allows them to take advantage of KTI’s advanced onboard fuel polishing to eliminate fuel contamination, the number one cause of engine problems.

The new FilterBOSS FPM models provide the same filtration performance as the larger units, in a smaller footprint. The programmable FPM-A models are available in either 90 or 180 GPH (gallons per hour) capacities and include an automatic shut-off feature that detects filter clogs or water in the filter to stop the filtration process before it contaminates the remaining fuel supply. Fully programmable using a seven-day timer, they can be set up to scrub all onboard fuel on a scheduled basis to ensure it is clear of water and other contaminants at all times. FPM manual models are available in 60, 90 or 180 GPH. Manual models are simplified units operated at will, by adding the Early Warning Systems  to the unit will give remote warning when the element is starting to clog.

Both models use reliable Racor marine filters, which are specifically designed for the harsh marine environment and readily available when replacement filters are needed. Both are available for either 12 or 24 volt electric systems and are all easily installed, requiring only minimal routine maintenance.

View the FPM models here

Visit The Store

Talk to a Rep

Contact Us!